 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC100EPT24 LVTTL/LVCMOS to Differential LVECL Translator The MC100EPT24 is a LVTTL/LVCMOS to differential LVECL translator. Because LVECL levels and LVTTL/LVCMOS levels are used, a -3.3V, +3.3V and ground are required. The small outline 8-lead SOIC package and the single gate of the EPT24 makes it ideal for those applications where space, performance, and low power are at a premium. The EPT24 is available in the 100E standard and is compatible with ECL 100K logic levels. http://onsemi.com 8 1 SO-8 D SUFFIX CASE 751 * * * * * * * * * * * 350ps Typical Propagation Delay Maximum Frequency > 1.0GHz Differential ECL Outputs Small Outline SOIC Package PNP LVTTL Inputs for Minimal Loading Flow Through Pinouts Q Output will default HIGH with inputs open ESD Protection: 4000 KV HBM, 200 V MM Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 181 devices MARKING DIAGRAM 8 KPT24 ALYW 1 *For additional information, see Application Note AND8002/D A L Y W = Assembly Location = Wafer Lot = Year = Work Week PIN DESCRIPTION PIN FUNCTION Differential LVECL Outputs LVTTL Input Positive Supply Ground Negative Supply VEE 1 LVTTL 8 VCC Q, Q D VCC D 2 LVECL 7 Q GND VEE NC 3 6 Q NC 4 5 GND ORDERING INFORMATION Device Package SOIC SOIC Shipping 98 Units/Rail 2500 Tape & Reel Figure 1. 8-Lead Pinout (Top View) and Logic Diagram MC100EPT24D MC100EPT24DR2 (c) Semiconductor Components Industries, LLC, 1999 1 December, 1999 - Rev. 1 Publication Order Number: MC100EPT24/D MC100EPT24 MAXIMUM RATINGS* Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Parameter Value -3.8 to 0 3.8 to 0 -3.8 to 0 3.8 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC VDC VDC mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. LVTTL INPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V; TA = -40C to +85C) Symbol IIH IIHH IIL VIK VIH VIL Input HIGH Current (Vin = 2.7V) Input HIGH Current MAX (Vin = 6.0V) Input LOW Current (Vin = 0.5V) Input Clamp Voltage (Iin = -18mA) Input HIGH Voltage Input LOW Voltage 2.0 0.8 Characteristic Min Typ Max 20 100 -0.6 -1.2 Unit A A mA V V V LVECL OUTPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V; VEE = -3.3V 0.3V; GND = 0V) -40C Symbol VOH VOL ICC Characteristic Output HIGH Voltage (Note 1.) Output LOW Voltage (Note 1.) Power Supply Current Min -1135 -1935 Typ -1020 -1750 2.0 Max -885 -1685 4.0 Min -1135 -1935 25C Typ -1020 -1770 2.0 30 Max -885 -1685 4.0 38 20 Min -1135 -1925 85C Typ -1030 -1790 2.0 30 Max -885 -1685 4.0 38 Unit mV mV mA mA IEE Power Supply Current 20 30 38 20 1. Output levels will vary 1:1 with GND; Outputs loaded through 50W to GND - 2.0V. AC CHARACTERISTICS (VCC = 3.3V 0.3V; VEE = -3.3V 0.3V; GND = 0V) -40C Symbol fmax tPLH, tPHL tJITTER Characteristic Maximum Toggle Frequency (Note 2.) Propagation Delay to Output Differential (Note 3.) Cycle-to-Cycle Jitter Min 1.0 300 500 TBD 800 Typ Max Min 1.0 300 530 TBD 180 100 800 25C Typ Max Min 1.0 300 560 TBD 150 200 800 85C Typ Max Unit GHz ps ps ps tr Output Rise/Fall Times Q, Q 70 125 170 80 130 tf (20% - 80%) 2. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 3. TTL input of 0V to 3V. http://onsemi.com 2 MC100EPT24 PACKAGE DIMENSIONS SO-8 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q http://onsemi.com 3 MC100EPT24 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MC100EPT24/D |
Price & Availability of MC100EPT24DR2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |